Choosing between FFC/FPC connector boards is less about the shared Cable Connector label and more about matching the board's stated layout to the wiring plan in front of you. These two options differ in pin count, connector format, pitch sequence, physical dimensions, package quantity, and listed price, so a direct choice is more useful than treating either as a general-purpose substitute.
Quick verdict
Choose the uxcell board when its named pull-down bent-pin arrangement is the requirement that leads the decision. Choose the Zaplyte board when the stated PCB-support format is the better match for the project. Both are new Cable Connectors, but their configurations point toward different uses.
The uxcell option is the lower-listed-price choice at USD 14.84. Zaplyte is listed at USD 21.06, making the listed-price spread USD 6.22. Start with the connector layout and pitch requirements; price becomes the deciding factor only after those specifications are settled.
| Board | Listed price | Pin count and connector description | Package |
|---|---|---|---|
| uxcell FFC/FPC adapter board | USD 14.84 | 4 pins; double-row bent pins | 1 board |
| Zaplyte FFC/FPC connector board | USD 21.06 | 24 pins; double-row female header strip | 2 pcs |
Where each board wins
uxcell wins when a four-pin board is the target. Its description specifies a 1 mm FPC socket-side pitch, a 0.5 mm FPC back-side pitch, and a 2.54 mm DIP pitch, giving it a clearly defined set of connection measurements.
Zaplyte wins when a two-piece package and a 24-pin double-row female header strip are the deciding requirements. It is described as a double-sided board with a single flat cable socket, rather than the pull-down bent-pin format named for uxcell.
Product notes
uxcell FFC/FPC Adapter Board
The uxcell FFC/FPC Adapter Board is the focused pick for a pull-down, double-row bent-pin arrangement. That named layout is the concrete reason to choose it when the project calls for this particular board style rather than a female header strip. The 1 mm socket-side, 0.5 mm back-side, and 2.54 mm DIP pitches further define its intended connector pattern. Its limitation is its stated 32 × 17.5 mm overall size, which is distinct from the Zaplyte board's 34 × 26 mm dimensions. This board makes the most sense when its named arrangement, pitch sequence, and compact stated geometry lead the selection.
Zaplyte FFC/FPC Connector Board
Zaplyte's FFC/FPC Connector Board stands out for its stated PCB Support product type and double-sided board format. Those details give it a clear reason to choose when that board construction is central to the build. Its connector measurements are also specific: 0.5 mm on the FPC socket side, 1.0 mm on the FPC back side, and 2.54 mm for the DIP pitch. The limitation is its 34 × 26 mm overall size, rather than the smaller dimensions specified for uxcell. It is best viewed as a deliberate choice for its PCB-support format and defined board geometry, not merely as another FFC/FPC adapter.
Final choice by use case
Pick uxcell when the four-pin bent-pin board arrangement and its stated pitch pattern are the governing requirements. Pick Zaplyte when the 24-pin female-header format, double-sided construction, and PCB-support designation are the better match. If the configurations are otherwise suitable for your plan, uxcell carries the lower listed price at USD 14.84, while Zaplyte is listed at USD 21.06.
